CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
7. This picture shows the position of the holding clips on the
right side of the unit.
9. Stick the SRT-6 between the cover and release the four clips. 10. Remove the A-COVER and protect the inner window with a
11. Protect the LCD MODULE with a protective film.
Service Manual 6233 RM-45 / 6234 RM-23
Page
3
(9)
CONFIDENTIAL
8. Bring the SRT-6 exactly to the position over the (invisible) clips.
NOTE! A little sliding motion could be needed (like a 'credit card')
when releasing the snaps. Do not damage the edges of the A-
COVER.
protective film.
12. Press out the KEYMAT.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved .0
MGR
25.Apr.2006