Technical Characteristics; Installing The Door Panel - Brandt DW9 Instructions For Use Manual

COMPARATIVE TESTS ACCORDING TO : AS/NZS 2007 : 98 (Fig. 8-10-12)
With the "Condensor Drying" activated
Programme "Fragile wash 40°C"
• Rinse aid dispenser setting on : 3
• Quantity of washing product : 10+40 g.
• For the determination of Drying Index the door of the dishwasher was opened approximately
240mm at the end of the program for 30 minutes.
If you use the door and false drawer, mount the
door using the plans supplied with the machine.
Fix the false drawer equipped with an opening
handle, previously installed on the band using
the six screws supplied in the plastic bag (Fig. A).
The false drawer may be mounted level with the
control band (Fig. B) or slightly raised (Fig. C)
but should not overlap by more than 3 mm
maximum.
The handle on the false drawer's fixing screw
heads must be flush with the false drawer.
If using a one-piece panel, assemble using the
plan.
Do not forget to add the 6 fixing screws
supplied in the plastic bag to the band.
Be careful to respect the 3 mm minimum
overlap between the top of the door and the
decorative panel (Fig. C).

TECHNICAL CHARACTERISTICS

+
INSTALLING THE PANEL DOOR
• 13 •
Voltage : 240 V – 50 Hz – Fuses : 10 A
Power : 2300 W
Capacity : 14 place settings
Water pressure : 3 psi/21 kPa min
100 psi/690 kPa max
Water evacuation pipe height : 60 cm - 1 m
Fig. A
6 fixing screws supplied in the plastic bag
Fig. B
False drawer
Dishwasher
door
Door panel
Fig. C
3 mm
Max