Source Selection - Panasonic CQ-VW120L Operating Instructions Manual

AV
Preparation:
¡Connect an optional external device to the AV IN.

Source Selection

29
You can view the images and listen to the sounds from
the connected external devices in the AV mode respec-
tively.
q Touch "Source Button".
d
Press [SRC/PWR] to change to desired mode.
To switch Operation Screen ON, touch the center of
touch panel.
Note:
¡ Every time the source is switched from iPod mode to
AV mode while iPod/iPhone video file is playing on
this unit, the still image of iPod/iPhone video file will
be displayed on the screen with AV mode.
However, this phenomenon is not a trouble with this
unit and iPod/iPhone unit.
Make sure to remove the cable connection (CA-
LDC100X, option) of front AV IN to iPod/iPhone and
connect the desired AV device to front AV IN connec-
tor using supplied conversion cable for AV IN when
you want to enjoy AV mode under above circum-
stance.
¡ You can set up the system so that the AV mode is not
selected (source skip). (
¡ If no operation is performed for 10 seconds or
touched, the operation buttons disappear.
30
CQ-VW120L
w Touch
(AV) on the
Source Selection
Screen.
a page 34)
Input
is
Source Button
DIMMER SET-UP
VOL PUSH MUTE
AV IN
[SRC/PWR]
AV IN
Open the cover to make the AV IN accessible
and make a connection.
CQ-VW120L