Configuration 2 - Mitsubishi Electric LDT46IV2 User Manual

Main-Menu

CONFIGURATION 2

LONG CABLE ON/OFF
Selects the LONG CABLE ON/OFF.
This function is for analog RGB signal (D-SUB/BNC) only and it is adjusted manually. Adjustable distance varies depending
on the installation conditions and cable to be used.
LONG CABLE MANUAL
Adjusts the LONG CABLE setting by increasing or decreasing the value.
The preset choices are 0 to 100.
OSD TURN OFF
The OSD control menu will stay on as long as it is use. In the OSD Turn Off submenu, you can select how long the monitor
waits after the last touch of a button to shut off the OSD control menu.
The preset choices are 5 -120 seconds.
INFORMATION OSD
Selects the information OSD display or not.
The information OSD will display when input signal or source change or warning message like as no-signal or out-of range.
A time between 1 to 10 seconds is available.
OFF TIMER
To select OFF TIMER mode ON/OFF.
In the OFF TIMER menu, you can preset the monitor to automatically power down.
A time between 1 to 24 hours is available.
When the OFF TIMER is set, the SCHEDULE (see page 29) settings will be disabled.
OSD H POSITION
Adjusts the horizontal position of the OSD menu.
OSD V POSITION
Adjusts the vertical position of the OSD menu.
MONITOR INFORMATION
Indicates the model and serial number of your monitor.
English-27