Play; Play From Bluetooth Devices; Play From External Devices - Philips BT2000 User Manual

4 Play

Play from Bluetooth devices

With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Play from Bluetooth devices
Note
•
Make sure that your Bluetooth device is compatible
with this speaker.
•
Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
•
The speaker can memorize a maximum of 4 paired
devices.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
•
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1
Slide the OFF /AUDIO IN/
» The LED indicator flashes blue.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
When [Philips BT2000] is displayed on
your device, select it to start pairing and
connection. If necessary, input "0000" as
the pairing password.
» After successful connection, the
speaker beeps twice, and the LED
indicator turns solid blue.
4
Play audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
EN
6
switch to .
To disconnect the Bluetooth-enabled device:
Press and hold PAIRING for two seconds;
•
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» The LED indicator flashes blue.
To reconnect the Bluetooth device:
• Next time you turn on the speaker, the
speaker will reconnect the last connected
device automatically; or
• On your Bluetooth device, select "Philips
BT2000" on your Bluetooth menu to start
connection.
To connect another Bluetooth-enabled device:
1
Press and hold PAIRING for two seconds
to disconnect the currently connected
device;
» The speaker enters Bluetooth pairing
mode.
2
Connect another Bluetooth device.
LED indicator
Flashing blue
Solid blue

Play from external devices

With this speaker, you can also listen to an
external audio device such as an MP3 player.
1
Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
Description
Connecting;
Waiting for pairing
Connected