Table of Contents
Advertisement
8.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the MOS FPC unit when disassembling or
reassembling the lens in order to maintain it clean.
The screw fitting the MOS FPC unit to the master flange
unit is fixed by the bond lock with the adjustment of the
installation angle of the MOS FPC unit against the lens
(optical axis adjustment) finished.
When remove it, refer to item "8.7.".
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease (RFKZ0472) as shown on "THE APPLICA-
TION OF GREASE METHOD" in the figure.
8.4.1.
Removal of the Zoom Motor Unit
and Lens FPC Unit
26
Advertisement
Table of Contents
