Chassis - Sony KDL-40W3000 Service Manual

NOTE: The components identifi ed by shading
and ! mark are critical for safety. Replace only
with part number specifi ed.

4-2. CHASSIS

(Check the Sony Electronics Service Information
7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-3
2-580-629-01 SCREW, +BVST 3X8
2-580-591-01 SCREW, +PSW M3X5
63
REF. NO. PART NO.
51 X-2176-664-1 BUTTON, MULTI ASSEMBLY
52 A-1226-202-B HW1 BOARD, MOUNTED
53 A-1253-586-B DF3 BOARD, MOUNTED (STT)
(KDL-46W3000 ONLY)
(When replacing the Inverter board for this model, refer to the instructions
for "Replacing the Inverter Connector Assembly" in the Disassembly section of
this manual.)
54 X-2178-833-2 SIDE TERMINAL ASSEMBLY
55 A-1361-955-A HW2 BOARD, COMPLETE
56 A-1362-638-A FB1 BOARD, COMPLETE
(ALL KDL-40W3000 and KDL-46W3000 SN 8,000,001 to 8,099,999
and SN 8,500,001 to 8,599,999 Only)
56 A-1419-002-A FB1 BOARD, COMPLETE
(KDL-46W3000 SN 8,100,001 to 8,499,999 and SN 8,600,001 and Up Only)
57 3-106-942-02 BRACKET, CARD
58 3-270-441-01 COVER, MS (H)
KDL-40W3000/46W3000
NOTE: Les composants identifi es per un trame et
une marque ! sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
51
52
62
61
DESCRIPTION [ASSEMBLY INCLUDES]
NOTE: The components identifi ed by a red outline and a
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
website for any additional service related issues for this model.)
4-635-966-01
3-682-691-00
2-674-965-51
60
REF. NO. PART NO.
59 A-1362-635-A
60 A-1269-502-A
61 A-1256-154-B
(Use this P/N for US models only)
61 A-1361-280-A
(Use this P/N for all destinations, including US after consumption of A-1256-154-B)
62 A-1256-156-B
(When replacing the Inverter board for this model, refer to the instructions
for "Replacing the Inverter Connector Assembly" in the Disassembly section of
this manual.)
62 A-1253-585-B
(When replacing the Inverter board for this model, refer to the instructions
for "Replacing the Inverter Connector Assembly" in the Disassembly section of
this manual.)
63 A-1226-204-B
SCREW (HEX)
NUT, WASHER HEXAGON
SCREW, +PSW 3SG
53
54
55
57
56
58
59
DESCRIPTION
AU BOARD, COMPLETE
TUU2 BOARD, MOUNTED
GF1 BOARD, COMPLETE
GF1BOARD, COMPLETE KIT (STT)
DF1 BOARD, COMPLETE(STT)
(KDL-40W3000 ONLY)
DF2 BOARD, MOUNTED(STT)
(KDL-46W3000 ONLY)
HW3 BOARD, MOUNTED
KDL-40W3000/46W3000
mark contain
[ASSEMBLY INCLUDES]
77