Electronic Hook Switch (EHS) Solutions for Alcatel-Lucent
SupportEd alCatEl - luCENt Ip phoNES
Alcatel 8-Serie (IP)
IP Touch 4028 & 4028 EE
IP Touch 4038 & 4038 EE
IP Touch 4068 & 4038 EE
EHS adaptor for Alcatel-Lucent
Jabra GN9350/
Jabra GN9350e
SEE THE LAST PAGE FOR ORDER INFO
Alcatel 9-Serie (UA)
4029
4039
OR
Jabra GN9120 EHS/
Jabra GN9125 EHS
SEtup INForMatIoN
To connect your Alcatel-Lucent phone and Jabra headset with the DHSG cable, just follow
these simple steps:
Jabra headset base and Alcatel 8 Series
Setting up the Jabra GN9350/GN9350e
headset
1.
Open up the cover on the base unit.
2.
On the LCD display, arrow over to the
handset picture and select it.
3.
Arrow down to the DHSG mode and
select it by pressing the okay button.
4.
Set Dial tone selector in position "A".
Dial tone
<
selector
4/ 1 2
3/ 1 2
OLI
AUX
Jabra GN9350/
Jabra GN9350e
regional sales contacts:
Americas: Bill Orlansky, borlansky@gn.com
EMEA: Norbert Lohwieser, nlohwieser@GN.com
APAC: Mike Powrie, mpowrie@gn.com
Jabra headset base and Alcatel 9 Series
Setting up the Jabra GN9120/GN9125 EhS
headset
1.
Set the headset to the DHSG setting
by keeping the headset in the charge
stand and hold plus and minus in for
6 seconds until the red light on the
headset flashes rapidly.
2.
Scroll through the three different
settings using plus and minus and set
to the lips icon. Leave for 15 seconds
until the unit has set itself and is
ready to go!
RHL
DHSG
AEI
Volume button
Link icon
Mute icon
Charge icon
4