Page 2
The Jabra brand is wholly owned by GN Netcom. Customer service is provided by GN Netcom. Please see details below. Australia 61 3 8823 9111 Japan 81 3 5297 7975 Austria 43 1 403 4134 P. R. China 86 10 6583 2311...
Thank you for purchasing the Jabra M5390 Multiuse headset. The Jabra M5390 Multiuse Headset is supplied together with the Jabra A335w Dongle and the Jabra M5390 Multiuse Base. This unique combination allows you to use one single headset for all your communication needs. The Jabra M5390 Multiuse headset connects simultaneously to mobile phones and desk phones - or to mobile phones and PC softphones.
2. Fitting the headset Fitting to the headset to your ear 2.1 Open the hinged ear hook as wide as possible. 2.2 Hold the headset to your ear so that the speaker fits comfort- ably and the microphone points towards your mouth. 2.3 Close the hinged ear hook around your ear.
3. Setting up your desk phone If your telephone has a headset port, go directly to 3.2b. 3.1 Unplug the handset cord from your telephone and connect it to the port on the base unit marked with 3.2a Connect the enclosed 3.2a telephone cord to the now empty handset port on the telephone,...
Page 7
3.4 Place the headset in the charge cradle and charge for a minimum of 30 min. before use. A full charge takes about 2 hours. The visual indicator on the headset will flash green while headset is charging, and the light will remain steady green when fully charged.
Page 8
Setting the outgoing volume 3.10 3.10 Make a call (see section 4) to someone who can act as a test person. 3.11 Adjust the outgoing volume 3.11 using the transmit volume control on the base unit. Move the switch through the 3 settings until test person confirms the appropriate volume.
‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device. o Your phone will find the Jabra M5390 Multiuse headset and ask if you want to pair with it. • Accept pairing by pressing Yes/OK (or similar) on the phone and confirm with the passkey or PIN ‘0000’...
5. Making a call from your desk phone 5.1 Put on headset. 5.2 Lift the handset from cradle, or press the telephone´s “line” button if the base is connected directly to the telephone's headset port. Then tap the Answer/End button to transfer the call to the headset.
6. Answering a call from your desk phone 6.1 Put on headset. 6.2 Lift the handset from cradle, or press the telephone’s “line” button if the base is connected directly to the telephone's headset port. Then tap the Answer/End button to transfer the call to the headset.
Switching from the headset to the telephone's handset 6.5 During a call using the headset, pick up the telephone handset and replace the headset in charge cradle. The call will not be routed through to the telephone handset until after the headset is in the charge cradle.
Page 13
Switching from the headset to your cell phone You can switch from your headset to your cell phone during an active call. You might want to do this if, for example, your headset battery is running low. • Use the menu on your cell phone to switch from the headset to your cell phone during an active call (see your cell phone’s User Manual).
Please see your cell phone’s User Manual for more information on this function. Remember! For optimal performance, wear the Jabra M5390 Multiuse headset and your cell phone on the same side of your body or within a line of sight of one another. In general, you will get better performance when there are no obstructions between your headset and your cell phone.
Page 15
Low battery 8.3 Approx. 10 minutes before the headset runs out of battery, the visual indicator on headset will start to flash with a red light and a series of tones will be heard. If the battery runs out of power, the visual indicator on headset 10 min will switch off automatically.
Page 16
Headset switch 8.5 If the headset is absent, the headset switch must be activated in order to use the handset or, if the headset is in ® use with another Bluetooth device, the headset switch must be activated in order to use the handset.
9. Reset/Pairing 9.1 At start-up, press the Answer/ End button down for three seconds. Alternatively, remove the snap-on cover and press the reset button ~ 3 sec. on the headset for three seconds. The visual indicator on the head- set will turn to steady blue. 9.2 Then press the reset button on the base unit for 3 seconds.
5 quick light-blue flashes. Also the speaker of the headset will say “Dongle in focus”. When activating the Jabra M5390 base as “in use“, the LED on the base will give 5 quick light-blue flashes. Also the speaker of the headset will say “Base in focus”. When activating a cell phone as “in use“...
12. Switching between the base and the Jabra A335w Dongle in a multiuse scenario A typical multiuse scenario is to have the headset connected to one cell phone and either the base or the dongle.
When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. Never use a charger that is damaged. Important: The “colored” indicator light will be on while charging and will turn off when charging is complete. The Jabra headset cannot be used while charging.
15. Appendix – GN 1000 Remote Handset Lifter (RHL) (optional accessory) The GN 1000 Remote Handset Lifter (RHL) is an optional acces- sory that automatically lifts and lowers your telephone’s handset when making, answering or ending a call. Setting it up 15.1 15.1 Attach the RHL to the telephone handset cradle.