PEUGEOT 108 Handbook page 91

Speed limiter (Vti 68 engine)
System which prevents the vehicle from exceeding the speed programmed by the driver.
the speed limiter is switched on manually:
this can be done whatever the speed of the
vehicle. However, if you are driving at less than
20 mph (30 km/h), the programmed speed will
be fixed at 20 mph (30 km/h).
the speed limiter is paused by operation of the
control.
the programmed speed can be exceeded
temporarily by pressing the accelerator firmly
beyond the point of resistance.
to return to the programmed speed, simply
release the accelerator pedal until the vehicle
returns to the programmed speed limit.
the programmed limit speed is erased
when switching off the ignition.
the speed limiter cannot, in any
circumstances, replace the need to
observe speed limits, nor can it replace the
need for vigilance on the part of the driver.
Steering mounted controls
the controls are grouped together on this
control stalk at the steering wheel.
1. Speed limiter on / off: by pressing the end
of the control stalk.
2. Programming the speed, then
Decrease the setting: by pushing the
control stalk down.
3. Restore speed limiter
Increase the setting: by pushing the control
stalk up.
4. Pause speed limiter: by pulling the control
stalk towards you.
Displays in the instrument
panel
the information is grouped together in the
instrument panel screen.
5. Speed limiter on / pause indication.
6. Speed value setting.
If you choose to display other information
(trip A for example), the speed limiter
information is automatically displayed again
after about 6 seconds.
Driving
5
89