12 V Battery - PEUGEOT 108 Handbook

12 V battery

Procedure for starting the engine using another battery or charging a discharged battery.
the presence of this label, in particular
with the Stop & Start system, indicates
the use of a 12 V lead-acid battery with
special technology and specification;
the involvement of a PeugeOt dealer
or a qualified workshop is essential
when replacing or disconnecting the
battery.
After refitting the battery, the Stop &
Start system will only be active after a
continuous period of immobilisation of the
vehicle, a period which depends on the
climatic conditions and the state of charge
of the battery (up to about 8 hours).
Before doing any work
Immobilise the vehicle: apply the
parking brake, put the gearbox in
neutral, then switch off the ignition.
Check that all electrical equipment is
switched off.
Do not push the vehicle to start the
engine if you have an etg electronic
gearbox.
Practical information
Access to the battery
the battery is located under the bonnet.
For access to the (+) terminal:
F release the bonnet using the interior lever,
then the exterior safety catch,
F raise the bonnet and secure it with its stay,
F lift the plastic cover for access to
the (+) terminal.
9
161