Driving; Starting - Stopping The Engine With The Key - PEUGEOT 108 Handbook

Starting - stopping the engine with the key

Ignition switch
1. "LOCK" position.
2. "ACC" position.
3. "ON" position.
4. "START" position.
If you use the accessories for a
prolonged period (key in position 2 or 3),
you risk discharging the battery. Starting
your vehicle will then no longer be
possible. Be aware.
Starting using the key
For vehicle fitted with a manual gearbox:
F Insert the key in the ignition switch.
F turn the key to position 2 and unlock the
steering column, by turning wheel slightly.
F Fully depress the clutch pedal.
F Put the gear lever into neutral.
F Operate the starter by turning the key to
position 4 (START).
F Once the engine is running, release
the key.
the key returns automatically to
position 3 (ON).
For vehicles fitted with an ETG electronic
gearbox:
F Insert the key in the ignition switch.
F turn the key to position 2 and unlock the
steering column, by turning wheel slightly.
F Press and hold the brake pedal.
F Put the gear lever into position N.
F Operate the starter by turning the key to
position 4 (START).
F Once the engine is running, release
the key.
the key returns automatically to
position 3 (ON).
Stopping
F Immobilise the vehicle.
F Put the gear lever into neutral (vehicles
fitted with a manual gearbox), or position N
(vehicles fitted with an etg electronic
gearbox).
F turn the key towards you to
position 2 (ACC).
F Press in and turn the key to
position 1 (LOCK).
F Remove the key from the ignition switch.
F turn the steering until the steering column
locks.
Avoid attaching heavy objects to the
key, which would weigh down on its
blade in the ignition switch and could
cause a malfunction.
Key in ignition
If the key has been left in the ignition,
an audible signal is heard on opening
the driver's door.

Driving

5
71