Charge the Battery
The first charge will take about 10 - 12 hours.
1. Flip the battery charger port cap down (located on the right, rear side of the car).
2. Insert the battery charger connector into the charger port.
3. Plug the
charger
normal and not a cause for concern.
4. After charging is complete (at least
taking about 10-12 hours) unplug the charger from the wall outlet and unplug the battery connector from the
charger port.
3
11
into a standard 120V wall outlet. Note: The charger may feel warm during charging. This is
eight
1
2
hours, but not more than
with the first charge
twenty four hours,
Need help?
Do you have a question about the SRT Viper KT1101WM and is the answer not in the manual?