Pioneer AVIC-F60BT Operation Manual page 164

Appendix
Appendix
MirrorLink
Message
The application list could not
be read out.
There is no supported applica-
tion on your MirrorLink de-
vice.
Communication error oc-
curred.
Launching the application
failed.
Failed to display the screen of
your device because of irregu-
lar resolution.
164
Engb
Cause
Failed to load the application list.
No supported applications can be
found.
There was a communication error.
Failed to launch the application.
The image size is too large.
Action
! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.
! Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, reset the smart-
phone.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorised Pioneer Service Sta-
tion.
Install MirrorLink compliant applications to
your MirrorLink device.
! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.
! Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, reset the smart-
phone.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorised Pioneer Service Sta-
tion.
Try again.
The size of the images transferred from the
device exceeds 800 × 480.