LevelOne FCS-1150 User Manual page 9

3. In case of connectivity issues or abnormal video quality.
How to do the reset?
Using a pointed object, such as a paper clip, press and hold the reset button for at least 5
seconds or until the Power LED goes off.
5) Power LED
The Power LED turns on when the camera is powered on and the system is running.
6) Ethernet Port
Connects to a network using a standard Ethernet cable.
7) Serial Port
This port connects to serial devices via RS-485 or RS-422 protocols. Use the supplied serial
port terminal block to connect the wires from the camera to the serial device.
See Connecting a Serial Device (Optional)
Hardware Manual
on page 16 for connection details.
9