S E C T I O N 2 - B A S I C O P E R A T I O N; Front Panel Overview; Back Panel Overview; Video Inputs - DVDO iScan Duo Owner's Manual

S E C T I O N 2 – B A S I C O P E R A T I O N

Front Panel Overview

Status LED IR Window
Power
Status LED – This displays the current state of the iScan Duo
Analog Audio Inputs
Video 3 Component 1 Video 1 1 & 2 Coaxial
Off = The unit is in standby mode
Red = No signal detected
1 2
Y (G) Pb (B) Pr (R) VIDEO/S 1
VIDEO 3
1 1
Blue = The unit is processing the signal
L R L R
A N A L O G A U D I O I N P U T S
S-VIDEO 2 2
Blinking Blue = There is a problem with HDCP authentication 1 2 3
VGA
A N A L O G V I D E O I N P U T S
Green = The unit detects an unsupported signal
S-Video Component 2 Video 2 VGA Port
Power Button – This toggles unit power between On and Standby.
IR Window – This is where all IR commands are received by the iScan. Do not obstruct this window.
Front Panel Display (FPD) – This is where all information from the on screen display (OSD) is
duplicated to assist in the setup of your iScan.
NOTE: When navigating the Menu, the Front Panel Display (FPD) always shows the current selec-
tion on the bottom line and the menu/submenu item on the top line. When you change a value of a
setting, the value is on the bottom line and the title of the parameter is on the top line.
Status LED IR Window
Navigation Buttons – These buttons are available on both the front panel and the remote control.

Back Panel Overview

Power
Analog Audio Inputs
Video 3 Component 1 Video 1 1 & 2 Coaxial
1 2
Y (G) Pb (B) Pr (R) VIDEO/S 1
VIDEO 3
1 1
L R L R
A N A L O G A U D I O I N P U T S
S-VIDEO 2 2
1 2 3
VGA
A N A L O G V I D E O I N P U T S
S-Video Component 2 Video 2 VGA Port
7
Front Panel Display (FPD) Navigation Buttons Enter
Up
Menu Exit
MENU EXIT
Left Down Right
Digital Audio Inputs
Optical Optical Digital 12V Triggers HDMI Audio
1 – 3 Output 1 & 2 Output Serial Port
SERIAL PORT
2 3 12VDC 50mA MAX
1 2
AUDIO
12VDC 5A
D I G I T A L A U D I O I N P U T S A U D I O OUT T RIGGER OUT
4 5 6 7 8
1 2 I N O U T
H D M I I N P U T S H D M I O U T P U T S USB I R POWER
HDMI Inputs HDMI Outputs Mini USB Remote Power
1–8 1–2 Port Control
Jacks
Front Panel Display (FPD) Navigation Buttons Enter
Up
Menu Exit
MENU EXIT
Left Down Right
Digital Audio Inputs
Optical Optical Digital 12V Triggers HDMI Audio
1 – 3 Output 1 & 2 Output Serial Port
SERIAL PORT
2 3 12VDC 50mA MAX
1 2
AUDIO
12VDC 5A
D I G I T A L A U D I O I N P U T S A U D I O OUT T RIGGER OUT
4 5 6 7 8
1 2 I N O U T
H D M I I N P U T S H D M I O U T P U T S USB I R POWER
HDMI Inputs HDMI Outputs Mini USB Remote Power
1–8 1–2 Port Control
Jacks

Video Inputs

The iScan Duo has fifteen (15) video inputs. Most popular formats are supported on each input.
The formats, colorspace and bit-depth that the inputs support are as follows:
• Video 1, Video 2 and Video 3
— Formats: NTSC, PAL, PAL-M and SECAM
• S-Video
— Formats: NTSC, PAL, PAL-M and SECAM
• Component/RGBS 1 and Component/RGBS 2
— Formats: 480i/p-60, 576i/p-50, 720p-50/60, 1080i-50/60, 1080p-50/60
— Colorspace: YPbPr and RGB
— In RGBS mode Video 1, Video 2 inputs are used as syncs
• VGA
— Formats: VGA/SVGA/XGA/SXGA-60
— Colorspace: RGBHV
• HDMI 1– 8
— Formats: 480i/p-60, 576i/p-50, 720p-50/60, 1080i-50/60, 1080p-24/25/30/50/60,
VGA-60, SVGA-60, XGA-60, SXGA-60
— Colorspace RGB/YCbCr 4:4:4/YCbCr 4:2:2
— Bit-Depth: 8/10/12-bit processed

Video Outputs

The iScan Duo has two HDMI video outputs. The default output is HDMI 1. Select HDMI 2 output
using VIDEO output button or the on-screen menu:
The HDMI digital video output can output the following signal types:
• RGB 4:4:4
• YCbCr 4:2:2
• YCbCr 4:4:4
To connect the iScan Duo to a display that has a DVI input, use either an HDMI-to-DVI cable or an
adapter.

Audio Inputs

There are fourteen (14) audio inputs on the iScan Duo:
• Three (3) Optical Digital inputs
• One (1) Coaxial Digital inputs
• Two (2) Analog (L/R) inputs
• Eight (8) HDMI 1.3 inputs
While the digital and analog audio inputs can be assigned to any one of the video inputs, the HDMI
audio inputs are tied directly to the HDMI video signal connected on the same input.
The iScan Duo accepts digital audio sourced from DVD players, satellite receivers, digital set top
boxes, HD-DVD players, Blu-ray players, game consoles, and other video components with digital
audio. These inputs are compatible with most consumer digital audio formats, including CD-Audio
(44.1kHz/16 bit LPCM), Dolby Digital, and DTS. The coaxial digital audio inputs are compatible with
any format with a sampling frequency between 24kHz and 192kHz, and with a data word structure
up to 24 bits in length. The optical digital audio inputs are compatible with any format with a sam-
pling frequency between 24kHz and 96kHz and with a data word structure up to 24 bits in length.
The HDMI audio inputs are compatible with all of the HDMI 1.3 audio formats.
8