Honda CRF230F 2006 Owner's Manual page 80

9. Pour clean Pro Honda Foam Filter Oil or an
equivalent (Canada: Honda Foam Filter Oil
or an equivalent) over the entire surface of
the air cleaner. Use both hands to evenly
spread the oil into the air cleaner. Gently
squeeze out any excess oil. (To keep your
hands dry, place the air cleaner in a clean
plastic bag before spreading the oil into the
air cleaner.)
10. Assemble the air cleaner and holder.
Insert the tabs ( ) in the air cleaner holes 7
( ). 8
11. Clean the inside of the air cleaner housing.
Apply a thin coat of grease to the sealing
12.
surface of the air cleaner.
13. Install the air cleaner assembly by inserting
the upper tab ( ) on the cleaner into the 7
upper hole ( ) in the air cleaner housing, 9
and the lower tab ( ) into the lower hole
( 10 ).
Hook the set spring.
Check that the air cleaner is properly seated.
7
14. Install the air cleaner housing cover and
screws.
15. Install the right side cover (page
RIGHT SIDE
(7)
(7)
(7) tabs
Air Cleaner
57 ).
(9)
(10)
(9) upper hole
(10) lower hole
Servicing Your Honda
71