Honda CRF230F 2006 Owner's Manual page 116

2. Check drive chain slack at several points
along the chain. The slack should remain
constant. If it isn't, some links may be
kinked and binding. Lubricating the chain
will often eliminate binding and kinking.
Excessive chain slack may allow the drive
chain to damage the engine cases.
3. Inspect the drive chain for:
damaged rollers
loose pins
dry or rusted links
kinked or binding links
excessive wear
damaged or missing O-rings
Replace the drive chain (page
damaged rollers, loose pins, or kinks that
cannot be freed. Lubricate the drive chain
(page 111 ) if it appears dry or shows signs
4.
112 ) if it has
of rust. Lubricate any kinked or binding
links and work them free. Adjust chain slack
if needed.
Check the chain slider ( ), chain guide slider
( ), chain roller ( ) and lower slider ( ) for 3 4
wear. If the chain slider and lower slider are
worn to the bottom of the cutouts ( ), have
your Honda dealer replace the slider.
Replace the chain guide slider if the chain is
visible through the wear inspection window
( ). 7
Replace the chain roller if it is smaller than
0.7 in (18 mm).
Servicing Your Honda
Drive Chain
2
5
6
(cont'd)
107