License Plate Lamps - Mini Owner's Manual

1. Squeeze the clips, arrows, and remove the
bulb holder.
2. Pull off the bulb and replace it.
3. Insert the new bulb and bulb holder in re‐
verse order.
4. Re-engage the bulb holder so that it audi‐
bly clicks into place.
MINI Clubman: the rear fog lamp is located in
the left tail lamp, refer to page 235.
John Cooper Works: aerodynamic bumper
1. Remove the bulb holder by turning it coun‐
terclockwise, arrow.
2. Pull off the bulb and replace it.
3. Insert the new bulb and bulb holder in re‐
verse order.

License plate lamps

5-watt bulb, C 5 W
Replacing components
Online Edition for Part no. 01 40 2 911 452 - VI/13
Replacing
MINI
1. Push the lamp to the left in the catch of the
lamp housing using the screwdriver, ar‐
row 1.
2. Take out the lamp, arrow 2.
3. Replace the bulb.
4. Insert the lamp.
MINI Clubman
1. Push the lamp to the left in the catch of the
lamp housing using the screwdriver, ar‐
row 1.
2. Take out the lamp, arrow 2.
3. Replace the bulb.
4. Insert the lamp.
Center brake lamp
This lamp uses LED technology for operation.
Contact your service center in the event of a
malfunction.
Mobility
237