License Plate Lamps - Mini Cooper Owner's Manual

MINI Paceman:
1. Switch off the light and remove the infrared
remote control from the ignition lock.
2. Open the tailgate,
3. Remove the cover from the luggage com-
partment side panel.
4. Unlock the retaining element, arrow 1, by
turning it.
5. Remove the screws, arrow 2, using the hex
wrench from the vehicle document case.
6. Remove the tail lamp.
7. Disengage the bulb holder by pressing down
on the clamping clip, arrow 1.
8. Take out bulb holder and pull out cable,
arrow 2.
Online Edition for Part no. 01402917368 - © 10/12 BMW AG
Replacing components
9. Exerting gentle pressure, turn bulb to the left
and remove.
10. To insert the new bulb and install the bulb
holder, proceed in reverse order. Ensure that
the lamp holder engages in all the fasteners.

License plate lamps

5 watt bulb, C 5 W
MINI Countryman:
MINI Paceman:
1. Using a screwdriver, push the lamp to the
left in the tab of the lamp housing, arrow 1.
Remove the lamp, arrow 2.
2.
3. Replace the bulb.
4. Insert the lamp.
Center brake lamp
This lamp uses LED technology for operation. In
the event of a malfunction, contact your MINI
dealer or a workshop that has specially trained
personnel working in accordance with the spec-
ifications of your MINI manufacturer.
MOBILITY
229