Usersetcontrol - Toshiba teli BG030 Instruction Manual

UserSetControl

This section describes UserSetControl category for the BG series.
You are able to save a user setting to the non-volatile memory of the camera. There are three user memory
banks for user setting.
By using user memory, you are able to restore frequently used settings at the time of next start-up.
The following table is the list of registers applied by "UserSetLoad"/"UserSetSave".
Table. The register list applied by "UserSetLoad"/"UserSetSave"
Category
ImageFormatControl
AcquisitionControl
DigitalIOControl
● Registers
Register
UserSetSelector
UserSetLoad
UserSetSave
UserSetDefaultSelector
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
Register
Width
Height
OffsetX
OffsetY
BinningHorizontal
BinningVertical
PixelFormat
AcquisitionMode
AcquisitionFrameRate
TriggerMode
TriggerSource
TriggerActivation
TriggerDelay
ExposureMode
ExposureTime
ExposureAuto
LineInverter
LineSource
Visibility Access
Beginner R/W Selects a bank of user setting.
Beginner W Executes load of the user setting.
Beginner W Executes to save the user setting.
Beginner R/W Selects a bank of user setting when camera powers up.
Category
CounterAndTimerControl
AnalogControl
ALCControl
UserSetControl
Description
62 / 69
Register
TimerDuration
TimerDelay
TimerTriggerSource
Gain
GainAuto
BlackLevelSelector
BlackLevel
Gamma
ALCReferenceLuminance
ALCExposureValue
ALCTolerance
ALCThrottle
ALCExposureTimeMin
ALCExposureTimeMax
ALCGainMin
ALCGainMax
UserSetDefaultSelector
D4211908D
http://www.toshiba-teli.co.jp/index.htm