Honda CRF50F 2004 Owner's Manual page 102

Rear Wheel Removal
RIGHT REAR
(2)
(1)
(3) (5)
(4)
(1) adjuster
(2) brake rod
(3) brake arm
LEFT REAR
(6)
(5)
(4)
(4) lock nut
(5) adjusting nut
(6) axle nut
Removal
1. Raise the rear wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the front of the
motorcycle with tie-down straps.
2. Unscrew the rear brake adjuster ( ). Press
the rear brake pedal and disconnect the brake
rod ( ) from the brake arm ( ). 2
3. Loosen the lock nut ( ) and adjusting nut
( ) on the chain adjuster on both sides.
5
4. Unscrew the axle nut ( ). Pull the axle out.
Push the wheel forward and derail the drive
chain from the rear sprocket. Remove the
wheel.
Take care to prevent getting grease, oil, or
dirt on the brake shoe surfaces. This can
cause poor brake performance or rapid brake
shoe wear after reassembly.
Wheels
1
3
4
6
Servicing Your Honda
93