Alarm Operation; Alarm Mode; Maintenance And Care - Hyundai H-PS1206 Instruction Manual

USB version 2.0) up to 16 Gb.
• This unit is also equipped with an
SD card socket that can accept and
play MP3/WMA/WAV/APE/FLAC3 files
stored on standard SD/MMC cards up
to 16 Gb.
Always switch off the unit or
change mode to another one before
removing a USB flash drive or SD card,
to prevent damage to your USB device
or memory card.
Note: Although this product is fully
compatible with USB 2.0 and SD card
standard formats, a small percentage
of USB flash drives and SD cards
might not be readable, due to those
device manufacturers' non-compliance
with the full (official) USB and SD card
standards.
• FAT32 file system is supported by
USB and SD of this unit.
According to the USB 1.1/2.0
Standard, usage of a USB device with
power current consumption exceeding
500 mA is not recommended without
supplementary power supply. Failure
to use supplementary power for
connected USB drives with power
consumption exceeding this value as
well as defective USB drives may cause
mechanical or thermal changes of
elements of this unit as well as failure of
internal elements of the USB port. Such
damages are not warrantee cases.
Warning: usage of external USB
drives containing BIN files in the root
directory may cause malfunction of the
unit or damage to the software.
Also the device does not support
Instruction manual
memory cards with the capacity less
than 256Mb.

Alarm operation

Alarm mode

Press and hold MODE button for
2 seconds. Using the roller button
choose the alarm sign and press the
button. ON or OFF will be displayed on
the screen. Choose ON and press the
button. Time on the screen will begin
to blink. Set hours with the roller button
and press it to confirm. Set minutes
in the same manner. Then scroll the
button to choose the sound source for
the alarm between RADIO and SD.
• When setting alarm, if you choose
RADIO then the playing radio station
will be set as the alarm (the playing
radio frequency is set as the last
played radio frequency),

Maintenance and care

If necessary, clean the unit with a
piece of cloth dampened with water
only (be sure the power cord is
disconnected). The unit shall not be
exposed to dripping or splashing and
no objects filled with liquids, should be
placed on the unit. Normal ventilation
of the unit shall not be impeded for
intended use.
5