Radio Shack 2.4GHz Cordless Phone Quick Start Manual

www.radioshack.com SM
Setting Up Your Phone
Choose a location that is near a phone
wall jack and power outlet. The base
can be placed on a desk, tabletop, or
mounted on a standard wall plate.
Refer to your Owner's Manual for wall
mounting instructions.
Remove the handset's battery
compartment cover. Insert the battery
pack connector (red and black wires)
into the small black jack inside the
compartment. Replace the battery
compartment cover and place the
handset in the base facing forward.
Connect the supplied AC adapter to
the DC IN 9V jack and a standard AC
wall outlet.
Charge the handset at least 15-20
hours before connecting the base to
the phone jack.
After battery charging is complete,
connect the telephone line cord to the
base and the phone wall jack.
UPZZ69010ZZ
RadioShack Corporation
Fort Worth, Texas 76102
Q Q
Q Q
UICK UICK
UICK UICK
2.4GHz Cordless Phone
Accessories are available at
your local RadioShack store
or online at
www.radioshack.com. The
following are some of the
available accessories. Visit
your local RadioShack store
or www.radioshack.com for
a more complete listing of
available accessories.
© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
S S
S S
TART TART
TART TART
Refer to your Owner's Manual for complete instructions.
Action
When the phone rings, remove
Answer a
the handset from the base
call
(Auto Talk).
1. Remove the handset from
2. The TALK/BATT LOW
Make a
call
3. Listen for the dial tone.
4. Dial the number.
Hang up Press
1. Remove the handset from
2. Listen for the dial tone.
Redial
3. Press
Ringer
N/A
Mute
OPTIONAL ACCESSORIES
Caller ID
Headset
E E
NGLISH NGLISH
43-3546
Using Your Phone
Handset On Base Handset Off Base
talk
Press , any number key,
*/tone
, or
talk
1. Press
talk
the base and press .
2. The TALK/BATT LOW
LED flashes and turns on.
LED flashes and turns on.
3. Listen for the dial tone.
4. Dial the number.
end
or return the handset to the base.
talk
1. Press
talk
the base and press .
2. Listen for the dial tone.
REDIAL/
3. Press
REDIAL/ PAUSE
PAUSE
to dial the last dialed number.
dialed number.
end
Press
ringing.
Digital Answering System
#
(Auto Talk).
.
.
to dial the last
while the phone is
02A03
Printed in China