Table of Contents
Advertisement
Operation (continued)
Indicators
The condition of the interactive pen is notifi ed by the illumination status of the BATTERY and
LINK indicators.
• When the pairing isn't set
BATTERY
Off
(repeating "blinks twice in 0.5 second
and goes off for 0.5 second")
Off
Steady green
Off
Blinking red (once every 3 seconds)
• When the pairing is set
BATTERY
Off
Blinking red (four times a second)
Blinking green (once a second) three
Off
Off
Steady green
Off
Blinking red (once every 3 seconds)
Off
Off
Blinking red (twice a second)
• During the low power mode
BATTERY
Steady red
Off
• When the error occurs
BATTERY
Off
*1: Such as the case that the Interactive Mode setting of the projector is turned Off while the interactive pen is
operated.
EN-10
LINK
Searching the projector that can be operated
with the interactive pen
Blinking red
Interactive pen is in operation.
or
Blinking green
(rapidly)
Communicating with the projector
LINK
During the pairing preparation mode (searching
for the projector to be paired with)
The pairing with the projector is established or
cancelled.
times
Interactive pen is in operation.
or
Blinking green
(rapidly)
Communicating with the projector
The supported projector isn't detected during
the pairing preparation mode.
Blinking red fi ve times
Searching the paired projector
LINK
Shifting to the low power mode
Steady red
During the low power mode
Off
LINK
Communication error occurs.
Æ Turn off the power of the interactive pen once,
Blinking red/green
Condition
Condition
Condition
Condition
and after a few seconds, turn it on again.
*1
*1
Advertisement
Table of Contents
