INTERACTIVE PEN MODEL RC-380P1 User Manual Contents Safety precautions ......2 Using precautions .......3 Introduction .........6 What’s included in the box ..6 Overview ........6 Preparations ........7 Operation ........8 Troubleshooting ......11 Speciﬁ cations ......12 Supported projectors: XD365U-EST, WD385U-EST Supported projectors are subject to change without notice.
Safety precautions WARNING: When you use the interactive pen, be sure to put the strap on your wrist. Do not wave the interactive pen with the strap put on your wrist. If the strap is not used properly, the interactive pen may slip from your hand and hit other people, resulting in injury.
Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused. This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.
Using precautions (continued) For the U.S. and Canada only: COMPLIANCE NOTICE OF FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
For Europe only: The wireless function of this device can be used only in Austria, Bulgaria, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Norway, Poland, Portugal, Romania, Slovakia, Spain, Sweden, Switzerland, Ireland, United Kingdom, Belgium, Netherlands, Luxembourg, Slovenia, Cyprus, Estonia, Iceland, Latvia, Lithuania, and Malta. This function cannot be used legally in countries other than the above.
Introduction Using this interactive pen, you can perform the operation of the computer such as drawing a line or clicking a button while projecting the image supplied from the computer. Important: • The interactive pen runs on the Windows XP, Windows Vista, and Windows 7 operating systems only, not on Mac OS operating system software.
Preparations Installing the batteries to the interactive pen Preparation: Check that the power switch is turned OFF. 1. Push down the cover of the battery holder ( c ), and then pull out the battery holder ( d ). 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). •...
Operation When operating the interactive pen, see also the manuals supplied with the projector and the computer. Preparation: • Connect the projector to the computer using the USB cable supplied with the projector. • Conﬁ gure the settings for using the interactive pen in the menu of the projector. •...
How to hold the interactive pen Hold the interactive pen in the similar way as you hold a normal pen or a remote control. Holding like a pen (when you operate the personal computer by pushing the pen tip to the screen) Important: •...
Operation (continued) Indicators The condition of the interactive pen is notiﬁ ed by the illumination status of the BATTERY and LINK indicators. • When the pairing isn’t set BATTERY LINK Condition Searching the projector that can be operated with the interactive pen Blinking red (repeating “blinks twice in 0.5 second and goes off for 0.5 second”)
Troubleshooting Before asking for repair of the interactive pen, check the following. Problem Solution The interactive pen doesn’t • Make sure that the interactive pen isn’t pointing at a shadow work at all or it works and its tip isn’t in a shadow. intermittently.
Speciﬁ cations The speciﬁ cations and outside appearance are subject to change without prior notice. Operation frequency 2.4 GHz ISM band Operation temperature 5°C - 35°C Operation humidity 30% - 90% Power consumption 0.3 W Dimensions (L x W x H) 203 x 22 x 23 mm Weight 49 g...