IOGear M1161 Installation Manual page 36

Step 6: Close your browser and change the network settings on your computer back to DHCP. Refer to
steps 3a through 3b.
Step 7: Disconnect the Ethernet and USB cables from your computer.
Step 8: Use the included RJ-45 Ethernet cable to connect the WiFi adapter with your device such as a
Blu-Ray player, HDTV, or game colsole.
Step 9: Power on your adapter using the USB cable or AC adapter.
The installation is complete. Your device is now wireless. If the device asks for the type of internet
connection, make sure "WIRED" is selected.
36