IOGear M1161 Installation Manual page 31

Step 6: Close your browser and change the
network settings on your computer back to DHCP
(Obtain an IP address Automatically & Obtain DNS
server address automatically). Refer to steps 3a
through 3d. Also do not forget to enable your
wireless connection if you disabled it.
Step 7: Disconnect the Ethernet and USB cables
from your computer.
Step 8: Use the included RJ-45 Ethernet cable to
connect the WiFi adapter with your device such as
a Blu-Ray player, HDTV, or game colsole.
Step 9: Power on your adapter using the USB
cable or AC adapter.
The installation is complete. Your device is now
wireless. If the device asks for the type of internet
connection, make sure "WIRED" is selected.
31