Gas Operation - Dometic RM 7601 L Operating And Installation Instructions

5.2.3

Gas operation

1. Open the valve of the gas cylinder
2. Open the shut-off valve to the gas supply.
A
The ignition process is activated automatically, accompanied by a ticking sound
approx. 30 sec. Upon successful ignition, the display LED (C) "Gas" lights yellow.
The refrigerator is in function. Use rotary switch (B) to regulate the temperature in the
main refrigerator compartment.
B. Automatic Energy Selection (RM 76x5 L, RM 78x5 L only)
"AUTO"-operation
5.2.4
RM7XX5 L - models are equipped with an "AUTO"-MATIC function.
Explanations:
Upon switching on, the electronics automatically select one of the three
possible energy types: 230V - 12V - liquid gas. The control electronics
automatically ensure that the refrigerator is supplied with the optimum
source of energy in each respective case.
Priority
The selected energy is displayed by the corresponding LED (i.e. 230V)
The refrigerator should only be operated using liquid gas
(Propane, Butane). Do not use Autogas, town gas or natural gas.
If the refrigerator is operated during travel using gas, the precautions
stipulated by the legislation in the respective country must be taken (in
conformity with the European standard EN 732).
Due to physical reasons, ignition faults could occur starting from an
altitude above sea level of approx. 1000 m /3280 ft. (No malfunction!)
As a basic rule, operation using gas is prohibited in petrol stations.
C
1. Set energy selector switch (A) to gas
2. Set rotary switch (B) to "MAX" postion.
1. Set energy selection switch (A) to position
1.) Solar (12V DC)
2.) 230V AC
3.) 12V DC
4.) Liquid gas
"AUTO" .
The LED "AUTO" illuminates
Manual operation is possible at any time.
8
.
.