Advertisement
4.2. SETTING THE DISCS IN THE MACHINE
Rotate the knob as shown in figure 1 below and open the cover. First place the plastic ejecting disc (figure 2), then the
selected cutting disc. Close the cover and reverse the rotation of the handle. Press on the start button to
automatically hook the discs in the correct position.
COVER OPENING (Figure 1)
DISC POSITION (Figure 2)
4.3. SLICING FOOD
Lift the handle and place the food inside the opening as shown in figure 3, then close the handle.
Press the green start button with your right hand, and with your left hand, lightly move the handle downwards until food is
fully used up.
(Figure 3)
Lift the handle to introduce other food.
The machine starts automatically when the handle is closed.
Repeat these operations until the food is fully used up.
It is possible to use the two openings with a single disc; when two discs are used for cutting sticks and match-like food,
the inlet opening set over the grid must be used
The smaller round opening is used to slit vegetables such as carrots, vegetable marrow, etc.
Warning: never use your hands to press the vegetables into the machine, always use the pestle supplied.
4.4. RELEASE AND REPLACEMENT OF THE DISC
S
Turn the knurled handle and lift the cover. (figure 1)
Turn the disc counterclockwise and cover the cutting edge with appropriate material (rubber, fabric, etc), then lift it by
setting your hand under the disc.
Simply lift the discs to remove the grid disc for dice cutting, or the disc for stick cutting with the plastic disc. (figures 4-5).
(Figure 4)
(Figure 5)
- 4 -
Advertisement
