Advertisement
Quick Links
Advertisement
Summary of Contents for ICB HLC-300
- Page 1 ICB VEGETABLE SLICER Model HLC-300 User and Maintenance Manual - 1 -...
-
Page 2: Safety Information
The slicer is packed in a sturdy cardboard box with internal molded insulation to protect the unit during transport. Included in the box: • HLC-300 Vegetable Slicer • User and Maintenance Manual • High ejecting disc and low ejecting disc... -
Page 3: Installation
3. INSTALLATION 3.1. PLACEMENT Warning: The unit location must comply with electrical regulations and general safety of use. The manufacturer declines any and all responsibility for direct or indirect damages which may ensue for non-compliance with the above mentioned regulations. Set the slicer on a wide, level, dry and solid surface away from heat sources and water spray. - Page 4 4.2. SETTING THE DISCS IN THE MACHINE Rotate the knob as shown in figure 1 below and open the cover. First place the plastic ejecting disc (figure 2), then the selected cutting disc. Close the cover and reverse the rotation of the handle. Press on the start button to automatically hook the discs in the correct position.
-
Page 5: Cleaning And Maintenance Operations
5. CLEANING AND MAINTENANCE OPERATIONS 5.1. GENERALITIES AND PRODUCTS FOR CLEANING Before carrying out any cleaning or maintenance operations, ensure that the mains switch is off and the supply plug is disconnected from the mains. Clean the equipment and the discs every day for optimal operation and life of the equipment. The discs, the grid for cutting dices, and the plastic ejector, can be removed and washed under a warm water jet. - Page 6 - 6 -...