Dynacord PowerSub 312 Owner's Manual page 20

DYNACORD
Hinweise gemäß EN 61000-3-2:2000, EN 61000-3-11:2000, EN 55103-1:1997.
Dies ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen; in diesem Fall kann vom Betreiber
verlangt werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen.
Das Gerät unterliegt Sonderanschlussbedingungen. Das zuständige Elektrizitätsversorgungs-unternehmen muß bestätigen, dass die Impedanz
der Versorgung maximal 0,35 Ohm + j 0,122 Ohm ist.
References in accordance with FCC, EN 61000-3-2:2000, EN 61000-3-11:2000, EN 55103-1:1997.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residental area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
This unit underlies some special connection conditions. The responsible electro utility company must confirm, that the impedance of the power
line does not exceed 0,35 ohms + j 0,22 ohms.
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
www.dynacord.com
© Bosch Sicherheitssysteme GmbH, 2013
Document Number F01U108410 | Vs 03
| 09/2013
Data subject to change without notice.