Recording Call Charges For Projects - Bosch Integral TM13 Operating Instructions Manual

Making calls

Recording call charges for projects

Your telephone system can separately meter and bill the call charges for projects or
private calls. To use this function, enter the project code or private code before dia-
ling an external call number. This function must be set up by the Bosch Service in
the telephone system.
Selecting dial call number with the project number
3
e.g.
34
Enter the special exchange code number
1
e.g.
which has been set up in your telephone
system for dialing, e. g. "1".
This exchange code number can have 1 to
5 digits.
Enter the code which has been set up in
4 3 3
your telephone system for the correspon-
ding project, e. g. "3433".
This code can have 1 to 9 digits.
A star "*" appears in the display for every
number.
Select the desired call number and pro-
cede to telephone as usual.
The charges for this call will now be recor-
ded and calculated in the system with the
corresponding project code.
Note:
Neither the exchange code number nor the
project code will be entered into the redial
memory. You must enter the number anew
everytime.
Even if you want to call back a call number
from the calling list with a project code, you
must enter the exchange code number and
the project code in the calling list display
manually.