Display Messages During Emergency Operation - Bosch Integral TM13 Operating Instructions Manual

If in doubt, look it up

Display messages during emergency operation

In the event of a power failure your telephone automatically switches over to emer-
gency operation. In this case the settings for some functions are changed. Depen-
ding on the default setting, certain functions like handsfree are blocked. If the dis-
play has not been switched off corresponding messages will be displayed.
Overview of messages
No monitoring
In order to reduce power consumption the loudspeaker has been turned off.
You cannot use the loudspeaker or handsfree.
No hands–free
In order to reduce power consumption the loudspeaker and the microphone
have been switched off. You cannot use handsfree but you can still use the
monitoring function.
Emergency operat.
Your telephone has switched over to emergency operation after a power
failure.
Em.Op.–...
Your telephone has switched over to emergency operation. The displayed
function, e.g. loudspeaker is blocked.
AEI off
Your telephone has switched over to emergency operation. The AEI inter-
face is blocked. You cannot use any equipment connected to it, like for ex-
ample a DSS module.
Note: Depending on the default setting, the LED will be switched off in order to re-
duce the power consumption. A call diversion will then no longer be signaled.
110