Promise SUPERSWAP 1600 User Manual page 30

SsuperSwap 1600 User Manual
8. Plug in the power connector of the new fan.
9. Carefully place the circuit board and fan back into the enclosure.
Check the fan label to see which direction the fan blows. Install the fan so it
blows outward from the enclosure.
10. Install the two mounting screws that hold the SuperSwap circuit board in
place.
11. Install the fan mounting screw.
12. Place the bottom cover on the SuperSwap enclosure and install the two
mounting screws.
13. Reinstall the SuperSwap enclosure into the PC chassis.
14. Power up the PC and check fan function.
24