Table of Contents
Advertisement
Fan Replacement
To replace a fan on the SuperSwap 1600:
1.
Power down the PC.
2.
Remove the SuperSwap enclosure from the PC chassis and turn it upside-
down.
Mounting
Screw
3.
Remove the two mounting screws and lift the bottom cover off the
SuperSwap enclosure.
4.
Remove the two circuit board screws.
5.
Remove the fan mounting screw.
6.
Gently lift the circuit board and fan out of the enclosure.
7.
Unplug the power connector of the old fan.
Circuit Board
Bottom Cover
Circuit Board Screws
Direction of Air Flow
Fan Mounting Screw
23
Chapter 3: Troubleshooting
Mounting
Fan
Screw
Advertisement
Table of Contents
