Table of Contents
Advertisement
The M6 Mixer uses high quality transformers on its inputs and outputs.
Transformer topology was chosen for its inherent ability to reject RF, thus making
this new mixer perfect for use with multiple RF systems.
This new design uses modern semi-conductors from Maxim, Linear Technology
National Semiconductor and Burr-Brown to name but a few. These operational
amplifiers, voltage regulators and precision voltage references feature low power
consumption, low noise and low distortion.
C.
ENVIRONMENTAL OPERATION
Your new M6 Audio Mixer has been designed to operate under extreme field
conditions. The electronics have been designed to operate over a temperature
range of -4 to 158 degrees Fahrenheit (-20 to +70C) less the affects on batteries.
This in addition to the M6's ability to operate under high humidity conditions
makes it perfect for harsh field conditions.
INTERFACING
A:
TO RDAT RECORDERS:
The M6 Mixer can be interfaced to virtually any professional recorder via the
standard XLR outputs.
B:
TO WIRELESS MICROPHONES:
The M6 Mixer will easily accept the output signal from virtually any wireless
receiver. It can accept microphone or line level signal via a simple switch setting.
Please note that most wireless receivers are not compatible with 48PH or 12T
mic power. You should always set the M6's mic powering switch to "D" dynamic
when using wireless receivers.
WARRANTY AND NON-WARRANTY SERVICE
In the unlikely event your M6 Mixer requires service it should be carefully packed
and shipped prepaid to:
Please call before shipping your mixer.
problem via the phone. We are always willing to help you with your M6 Mixer
Professional Sound Corporation
Service Department
28085 Smyth Drive
Valencia, CA 91355 USA
PH 661-295-9395
FAX 661-295-8398
e-mail
techsupport@professionalsound.com
11
We may be able to solve your
Advertisement
Table of Contents
