Environmental Operation; Porta Brace Case; Interfacing; To Betacams - PSC M4 mkII Operation Manual

C.

ENVIRONMENTAL OPERATION

Your new M4mkII Audio Mixer has been designed to operate under extreme field
conditions. The electronics have been designed to operate over a temperature
range of -4 to 158 degrees Fahrenheit (-20 to +70C) less the affects on batteries.
This in addition to the M4mkII's ability to operate under high humidity conditions
makes it perfect for harsh field conditions.
D.

PORTA BRACE CASE

Each PSC M4mkII Mixer is supplied with a custom-made Porta Brace case and
shoulder strap. This case includes sewn on mounting rings allowing you to
mount Porta Brace accessory cases such as their RF Multi case. These cases
accommodate your wireless receivers. You can call Porta Brace or any of their
authorized dealers for the complete line of Porta Brace products.

INTERFACING

A.

TO BETACAMS:

The PSC M4mkII Mixer is especially designed for easy interfacing with all
popular Betacam type cameras. The M4MKII is equipped with a 10 pin Hirose tm
connector on the left-hand side panel. This all-inclusive connector provides both
left and right balanced outputs and tape returns. Pin Outs are as follows:
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
The outputs are electrically the same as the XLR outputs on the right side of the
mixer. Thus, the output levels can be switched to the mic or live levels.
PSC manufactures a selection of standard M4mkII Beta snake cables for use
with the new M4mkII Mixer. These cables are available in standard and camera
breakaway versions from any authorized PSC dealer.
follows:
FPSC1091M4A
FPSC1091M4B
FPSC1091M4C
FPSC1091M4D
Left Output High
Left Output Low
Right Output High
Right Output Low
Left Tape Return
Tape Ground
Right Tape Return
Tape Ground
Ground
Ground
15' (4.5M)
15' (4.5M)
25' (7.5M)
25' (7.5M)
14
Part numbers are as
Standard
Breakaway
Standard
Breakaway