Table of Contents
Advertisement
All silk-screening is printed sub-surface (below) a hardface Lexan tm overlay.
This process provides a silk-screened label that is virtually wear proof. The
lettering will not wear off as on other mixers.
B.
ELECTRONIC TOPOLOGY
The new AlphaMix was designed from a clean sheet of paper.
completely new circuitry designs based upon the latest advances in semi
conductor technology.
reduced size and weight.
The AlphaMix uses proprietary preamplifier designs that are the result of many
hours spent testing and tweaking the input circuitry. We believe you will find
them to be very, very quiet. The AlphaMix uses the highest quality dual isolated
output transformers available on an ENG style mixer.
transformers designed to our specifications and custom built with you, our
customers in mind. The transformer manufacturer refers to our design as the
"Cadillac" of transformer designs.
inherent ability to reject RF, thus making this new mixer perfect for use with
multiple RF systems.
This new design uses modern semi-conductors from Maxim, Linear Technology
National Semiconductor and Analog Devices to name but a few.
operational amplifiers, voltage regulators and precision voltage references
feature low power consumption, low noise and low distortion. They also feature
the ability to swing from rail to rail resulting in an energy efficient design.
C.
ENVIRONMENTAL OPERATION
Your new AlphaMix has been designed to operate under extreme field
conditions. The electronics have been designed to operate over a temperature
range of -4 to 158 degrees Fahrenheit (-20 to +70C) less the affects on batteries.
This in addition to the AlphaMix's ability to operate under high humidity
conditions makes it perfect for harsh field conditions.
D.
PORTA BRACE CASE
Each PSC AlphaMix is supplied with a custom-made Porta Brace case and
shoulder strap. This case includes sewn on mounting rings allowing you to
mount Porta Brace accessory cases such as their RF Multi case. These cases
accommodate your wireless receivers. You can call Porta Brace or any of their
authorized dealers for the complete line of Porta Brace products.
INTERFACING
A.
TO BETACAMS:
The PSC AlphaMix is especially designed for easy interfacing with all popular
Betacam type cameras. The AlphaMix is equipped with two 10 pin Hirose tm
connectors on the right-hand side panel. These all-inclusive connectors provide
both left and right balanced outputs and tape returns. Pin Outs are as follows:
In addition, it features surface mount technology for
Transformer topology was chosen for its
13
It utilizes
We had these
These
Advertisement
Table of Contents
