Table of Contents
Advertisement
62
Keys and Remote Control
Programming to the Remote Control
1. Switch the ignition on.
2. Move the memory features to the desired positions using the
associated controls.
1
4. Press the lock button on the remote control within three seconds.
Repeat this procedure with memory button 2 and a second transmitter if
desired.
Deactivating from the Remote Control
1. Press and hold the desired memory button for five seconds. A tone
will sound after about two seconds. Continue to hold until you hear a
second tone.
2. Press the unlock button on the remote control within three seconds.
Repeat this procedure for each additional remote control if desired.
Car Finder
Press the button twice within three seconds. The horn will
sound and the turn signals will flash. We recommend you
use this method to locate your vehicle, rather than using the
panic alarm.
Sounding a Panic Alarm
Press the button to activate the alarm. Press the button again
or switch the ignition on to deactivate.
Note: The panic alarm will only operate when the ignition is off.
2014 Edge (edg)
Owners Guide gf, 2nd Printing, March 2014
USA (fus)
3. Press and hold memory button 1
for about five seconds. A tone will
sound after about two seconds.
2
Continue to hold until you hear a
second tone.
Advertisement
Table of Contents
