Table of Contents
Advertisement
292
These are examples of unacceptable moisture (usually caused by a lamp
water leak):
• Water puddle inside the lamp.
• Large water droplets, drip marks or streaks present on the interior of
the lens.
Take your vehicle to a dealer for service if any of the above conditions of
unacceptable moisture are present.
Replacing headlamp bulbs
WARNING: Handle a halogen headlamp bulb carefully and keep
out of children's reach. Grasp the bulb only by its plastic base
and do not touch the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are operated.
Note: If the bulb is accidentally touched, it should be cleaned with
rubbing alcohol before being used.
1. Make sure that the headlamp control is in the off position.
2. Open the hood.
5. Disconnect the electrical connector.
6. Reverse the procedure to install the new bulb.
2014 Edge (edg)
Owners Guide gf, 2nd Printing, March 2014
USA (fus)
Maintenance
3. Remove the bulb cover.
4. Turn the bulb holder counterclockwise and
remove it.
Advertisement
Table of Contents
