X4-TECH SOL T700 Instruction Manual page 28

› Capacitors within the device may still carry voltage even though they have been
disconnected from all power supply sources.
› Repairs are only to be carried out by qualified personnel, who are familiar with
the hazards involved and the relevant regulations.
Transporting or sending the device
Please retain the original box and the packaging material in case you need to
transport or send the device out for maintenance at a later date. Please note that
the device should be repacked in the original packaging. The box and packaging
have been especially developed for this device in order to protect it during trans-
port and against damage. Retain this instruction manual for future reference and
where required pass it along with the device if handed over to a third party.
Keeping the external case clean
Never use volatile fluids near the device, as for example insect spray. Avoid letting
the device come in contact with rubber or plastic products for longer periods of
time. These could otherwise leave marks behind.
Cleaning the device
Unplug the power cable before cleaning. Always use a soft and dry cloth to clean
the unit's exterior. If the device is extremely dirty you can use a soft cloth, dam-
pened with water or a mild cleaning solution to clean. Never use any abrasive or
harsh cleaning agents (e.g. alcohol, benzine or thinners) as these could damage
the controls, casing or any markings and labels found on the device.
Contribute to a better environment by using a designated disposal system (e.g.
Dual System in Germany) or recycling site for the disposal of packaging material.
54 55
Chapter 12 Maintenance, handling and cleaning Chapter 12 Maintenance, handling and cleaning