X4-TECH SOL T700 Instruction Manual page 22

OSD › select a menu color scheme
Time on OSD › select on/off to display/not display the time on screen
OSD Timeout › determine the window fade out effect
(e.g. changing channels)
OSD Trans › select the menu window transparency
OSD Language › select a preferred menu language
MP4 Sub Language › select a preferred subtitle language*
1. Audio Language › select the preferred first language*
2. Audio Language › select the preferred second language*
* These settings refer to, for example, DVDs or files found on removable storage
devices.
TV
Display Mode › determine if the color system is to be selected
automatically or if a PAL or NTSC setting is preferred.
Aspect Ratio › select a preferred aspect ratio (16:9, 4:3 LB or 4:3 PS)
Brightness › select to adjust the brightness
Contrast › select to adjust the contrast
Hue › select to adjust the shade of color
Saturation › select to adjust the color saturation
› In addition to the above options, you can also press the „ MODE" button to open
a further menu. Setting options that can be performed in this menu are indepen-
dent and/or additional to those found within the menu „ TV".
› Press the „ MODE" button.
Use the „" and „ " buttons to select between the menu options „PICTURE" and
„SYSTEM".
Press „ ENTER" or „ " to access the selected menu.
42
Chapter 8 Main menu
Use the „ " and „ " buttons within this submenu to carry out setting adjustments.
Press the „ MODE" button once again to return to the menu selection option or to exit
the menu again.
MODE MENU
PICTURE BRIGHTNESS For brightness adjustments
CONTRAST For contrast adjustments
COLOR For color saturation adjustments
LANGUAGE For selecting the language of this menu
RESET Restore factory default settings
SYSTEME PICT. ASP. Switch between a 16:9 and 4:3 screen format
VERTICAL Flip an image vertically
System Setup
› Select this menu to carry out basic setting options
EQ Setup › select an equalizer setting
Surround › select a surround sound effect
JPEG Effect › select on/off to display/not display picture effects during viewing
LCN › turn the logical channel number on/off
Area › select an area
Time
› In this menu option you have the opportunity to set the time and date.
Timer Mode › select if the time is to be received automatically or manually set
Date › enter the date in the following order: mm/dd/yyyy
Time › enter the time hh:mm
43
Chapter 8 Main menu