Table of Contents
Advertisement
+
X7822r/X7822r
User's Manual
Version 1.0
You may map a port to an interface by clicking on the Add
Reserved Mapping link under the Disable NAT to internal
interfaces button. You will then see the following screen:
Internal IP Address: Enter the IP address to which you would
like to map a protocol and port.
Transport Type: select a protocol from the drop-down list.
Port: Enter the port number of that protocol.
Click on the Add Reserved Mapping button when completed.
Please note that settings can only be permanently saved through
the Maintenance
Save interface.
- 34 -
Advertisement
Table of Contents
