Table of Contents
Advertisement
+
X7822r/X7822r
User's Manual
Version 1.0
You will then see the following screen:
VPI: Enter the VPI value into this box.
VCI: Enter the VCI value into this box.
Qos: Select the quality of service level from the menu.
DHCP Client: Check this box if you would like the IP address for
this connection to be determined by a DHCP server (if you select
this option, you do not need to enter an IP address or subnet
mask).
IP Address: Enter the IP address of the connection (if the new
connection is not a DHCP client).
IP Subnet Mask: Enter the subnet mask for the IP address
above (if not a DHCP client).
Click on the Create this new service button to complete the
configuration. Please note that settings can only be permanently
saved through the Maintenance
Save interface.
- 32 -
Advertisement
Table of Contents
