Bluetooth
Using the device - Presenter Mode
5
1
8
2
1
Mode switch button (Presenter mode)
2
Previous slide
3
Next slide
4
Laser pointer trigger - Press to activate the laser pointer
5
Blank Screen
6
Slideshow Start - Press once to begin
Stop - Press and hold for 2 second to stop the slide show
7
Volume up & Volume down
8
On - Press 3 seconds to turn on the presenter (LED blink once)
Off - Press 3 seconds to turn off the presenter (LED blink twice)
9
Laser light emitter
®
Presenter
9
6
7
3
4
Bluetooth
Initial Configuration
Before you can begin using your Bluetooth presenter, you will first need to
perform some initial setup steps.
NOTE: PLEASE USE THE LATEST BLUETOOTH DEVICE DRIVER. INSTRUCTION
SCREENS MIGHT VARY DEPENDING ON THE VERSION OF YOUR BLUETOOTH DEVICE
DRIVER.
Bluetooth Software: Mac
1. Go to the Bluetooth icon located on your desktop or in the system bar and
click the icon to begin setup. Select "Turn Bluetooth On" to activate the
Bluetooth function on your Mac.
2. Scroll down the list and select "Set up Bluetooth Device..."
®
Presenter