Troubleshooting; Maintenance - Aiwa ADC-M65 YZ Operating Instructions Manual

TROUBLESHOOTING

Error code (when using the optional AIWA CD
Changer)
In the following cases the corresponding error code
indication appears. Follow the suggestions below to
solve the problem. If the error code indication does not
disappear, consult an AIWA service center.
ERROR01 The disc magazine is not properly inserted
in the CD Changer. Reinsert the magazine.
Refer to the instruction manual for the CD
Changer.
ERROR02 No CDs are loaded in the disc magazine.
Insert CDs properly. Refer to the instruction
manual for the CD Changer.
ERROR03 Focus error. Check that the discs are loaded
properly in the disc magazine (right side up,
etc.).
ERROR04 Problem with the CD Changer. Reset the
unit by pressing the reset button. If this does
not solve the problem, consult an AIWA
service center.
Reset button
If a CD Changer does not operate properly, press the
reset button with a pointed object such as a pencil, etc.
Note that all your settings will be erased if this button is
pressed.
Reset button
9
ENGLISH

MAINTENANCE

Cleaning the front panel
Wipe the surface with a soft, dry cloth.
Cleaning the connector
The connector needs to be cleaned occasionally. Wipe
the surface of the connector with a cotton swab slightly
moistened with alcohol.
Back of the front panel