Table of Contents
Advertisement
4.
Select "Service" and press the controller.
5.
Change to upper field if necessary. Turn the
controller until "Service requirements" is
selected and press the controller.
6.
Select "Status" and press the controller.
The display shows a list of selected service and
maintenance procedures, as well as legally
mandated official inspections.
You can request more detailed information on
every entry.
Select the entry and press the controller.
To exit from the menu:
Select the
arrow and press the controller.
Online Edition for Part no. 01 41 0 012 830 - © 08/06 BMW AG
Symbols
No service is currently required.
The deadline for service or an official
inspection is approaching. Please
arrange a service appointment.
The service deadline has already passed.
Entering dates for state emission and
vehicle inspections*
Make sure the date on the Control Display is set
correctly, refer to page 76; otherwise, the effec-
tiveness of CBS Condition Based Service is not
ensured.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Info sources" and press the control-
ler.
4.
Select "Service" and press the controller.
5.
Change to upper field if necessary. Turn the
controller until "Service requirements" is
selected and press the controller.
6.
Select "Status" and press the controller.
7.
Select "State inspection" and press the
controller.
8.
Select "Set service date" and press the
controller. The month is highlighted.
71
Advertisement
Chapters
Table of Contents
