BMW M6 Owner's Manual page 56

> "Head-Up Display"
Views of the Head-Up Display, refer to
page 90
You can reset all settings for MDrive to their
default values:
> "Reset to default"
6. Select the desired function.
7. Press the controller.
8. Turn the controller to select the desired set-
ting.
"Unchanged" retains the current setting
made outside of MDrive.
9. Press the controller.
The setting is stored for the remote control cur-
rently in use.
Activating settings
Press the button on the steering wheel.
The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions
contained in MDrive are active.
Pressing the button again deactivates MDrive.
54
Online Edition for Part no. 01 41 0 012 830 - © 08/06 BMW AG
*
If the indicator lamp flashes after pressing
the button, MDrive was unable to react, as
the ABS Antilock Brake System or DSC
Dynamic Stability Control is currently control-
ling the vehicle stability. Press the
again when the indicator lamp no longer
flashes.<
Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
buttons in the center console. To reactivate all
settings made for MDrive on the Control Dis-
play: press the button twice.
button