Citizen CBM-270 Service Manual page 8

2. Removing the Screws from the Bottom of the Main Body
(1) Turn over the printer body.
(2) Remove two M3 ´ 10 (BT) screws. Then, turn back the printer body to its original position.
Do this, holding its upper and bottom covers.
3. Detaching the Printer Cover and Paper Roll
(1) Detach the printer cover. Put a finger, etc. on a convexed part from the rear of the printer
body and lift.
(2) Detach the paper roll.
and detach it gently.
USER'S MANUAL.
If the paper roll has been set in the printer, cut he surplus paper
See "HOW TO REMOVE REMAINING PAPER ROLL" in the
8
CBM-270 Service Manual
CITIZEN